The following table illustrates the multibase source icons and their corresponding connections.
Table 9: Multibase Source Controls
ConnectionBase Icon
USB to USB cord or Y-Cable
The desk phone icon corresponds with the middle USB port at the back
of the multibase. It is intended for connecting to Cisco IP Phones but it
will function properly with any compatible call device.
Micro-USB cord
The laptop icon corresponds with the micro-USB port found on the back
of the multibase. The micro-USB port is intended for connections with
a laptop or desktop computer but it will function properly with any
compatible call device.
Cisco Headset 500 Series User Guide
10
Your Headset
Cisco Headset 560 Series Multibase
To Next Page
Loading...
