CHAPTER 3
Headset Settings
You can customize a range of settings for your Cisco Headset 500 Series. Customized settings are stored in
the headsets so the settings are carried over to other supported Cisco devices. For example, a customized
volume setting set on a Cisco IP Phone carries over to a Cisco DX80.
• On-Premises Phone Headset Customization, on page 21
• Multiplatform Phone Headset Customization, on page 23
• Webex DX Headset Customization, on page 24
• Jabber Headset Customization, on page 25
• Webex Meetings Headset Customization, on page 26
On-Premises Phone Headset Customization
Once you personalize your headset settings, your tuning selections are saved and are applied to any future
headset model you use in your Cisco IP Phone.
Adjust Your Bass and Treble (USB Only)
You can adjust how much bass or treble your hear through your headset when you use a USB connection.
Procedure
Step 1 Press Applications .
Step 2 Select Accessories > Cisco Headset.
Step 3 Press Setup and select Speaker > Tuning.
Step 4 Press the Navigation cluster, left or right, to adjust the tuning.
Adjust Your Speaker Feedback (USB Only)
You can adjust how much of your own voice you want to hear through your headset speaker when you use a
USB connection.
Cisco Headset 500 Series User Guide
21
To Next Page
Loading...
