CHAPTER 2
Calls
Call functions in the Cisco Headset 500 Series are similar across all models. However, there is some variation
in button location and behavior between the wired and wireless headset models.
• Wired Headsets, on page 15
• Wireless Headsets, on page 17
Wired Headsets
While the button layouts differ, the inline controllers on Cisco Headset 521, 522, 531, and 532 use the same
call controls. See the following section for specific call control functions.
Related Topics
Cisco Headset 520 Series, on page 1
Cisco Headset 530 Series, on page 2
Make and Answer Calls
Procedure
On the inline controller, press Call .
Adjust Your Volume
Procedure
Press Up or Down on the inline controller.
Cisco Headset 500 Series User Guide
15
To Next Page
Loading...
