Cisco 521 - Multiplatform Phone Headset Customization

Procedure
Step 1 Press Applications .
Step 2 Select Accessories > Cisco Headset.
Step 3 Press Setup and select Microphone > Test.
Step 4 Press Record and speak into the microphone.
Step 5 Press Stop rec when you finish speaking.
Step 6 Press Play to review your test recording.
Multiplatform Phone Headset Customization
Once you personalize your headset settings, your tuning selections are saved and are applied to any future
headset model you use in your Cisco IP Phone.
Adjust Your Bass and Treble (USB only)
You can adjust how much bass or treble your hear through your headset when you use a USB connection.
Procedure
Step 1 Press Applications .
Step 2 Select Status > Accessories.
Step 3 Highlight Cisco Headset and press Setup.
Step 4 Select Speaker > Tuning.
Step 5 Press the Navigation cluster, left or right, to adjust the tuning.
Step 6 Press Save to apply and retain your setting.
Adjust Your Speaker Feedback (USB Only)
You can adjust how much of your own voice you want to hear through your headset speaker when you use a
USB connection.
Procedure
Step 1 Press Applications .
Step 2 Select Status > Accessories.
Step 3 Highlight Cisco Headset and press Setup.
Cisco Headset 500 Series User Guide
23
Headset Settings
Multiplatform Phone Headset Customization