Cisco 521 - Reject a Call

• If you have an incoming call, the headset answers automatically.
End a Call
Procedure
Hold Call on your headset until you hear a tone.
• You can also end a call by placing your headset on its base.
Reject a Call
On Cisco IP Phones, this feature is supported on:
• On-premises: phones with Firmware Release 12.5(1) or later
• Multiplatform: phones with Firmware Release 11.2(3) or later
Procedure
Press Call on your headset twice.
Put a Call on Hold and Resume a Call
On Cisco IP Phones, this feature is supported on:
• On-premises: phones with Firmware Release 12.5(1) or later
• Multiplatform: phones with Firmware Release 11.2(3) or later
Procedure
Step 1 Press Call on your headset.
Step 2 Select the call that you want to resume.
Step 3 Press Call.
Cisco Headset 500 Series User Guide
19
Calls
End a Call