Headset Connection
Connect Your Headset to a Bluetooth Device
Put your headset into pairing mode to make it discoverable to other devices. Your Cisco Headset 730 can
save up to eight different Bluetooth devices and maintain simultaneous connections with up to two devices
at once.
If you already have two active Bluetooth sources, you must disconnect one before you can save another
Bluetooth device to your headset.
Note
You can also follow the prompts in the Cisco Headsets app when you connect your headset to your mobile
phone.
Procedure
Step 1 Slide up and hold the Power/Bluetooth switch for two seconds until the Bluetooth LED blinks.
Step 2 Enable Bluetooth on your device.
You can enable and disable Bluetooth from the Settings menu on most call devices.
Step 3 Select your headset from the device list.
Your headset will appear in the device list as Cisco HS 730 followed by the last three digits of your headset
serial number.
Related Topics
Your Headset Serial Number, on page 33
Cisco Headset 730 User Guide
5
Your Headset
Headset Connection
To Next Page
Loading...
Need help?
General
Weight and Dimensions
