Procedure
Slide and hold the Power/Bluetooth switch for nine seconds, until you hear "Bluetooth records erased."
Use the USB-C Cable
Use the included USB-C cable to connect your headset with your laptop, Cisco IP Phone, or Cisco Webex
DX device.
Procedure
Step 1 Plug the USB-C cable into the port at the bottom of the left ear cup.
Step 2 Connect the other end of the cable to your intended device.
Step 3 Slide the Power/Bluetooth slider up to turn on the headset.
Cisco Headset 730 User Guide
8
Your Headset
Use the USB-C Cable
To Next Page
Loading...
