CHAPTER
2-1
Cisco Wide Area Virtualization Engine 7541, 7571, and 8541 Hardware Installation Guide
2
Preparing to Install the WAVE-7541,
WAVE-7571, and WAVE-8541
This chapter contains important safety information that you should know before you work with the
WAVE-7541, WAVE-7571, and WAVE-8541. Use the guidelines in this chapter to ensure your own
personal safety and to help protect your appliance from potential damage.
This chapter contains the following sections:
• Safety Warnings and Cautions
• Safety Guidelines
• Understanding the Environmental Requirements
• Understanding the Power Requirements
• Understanding the Grounding Requirements
Note Read the Regulatory Compliance and Safety Information for Cisco Wide Area Virtualization Engines
document and the Site Preparation and Safety Guide that came with your appliance before you begin the
installation.
Safety Warnings and Cautions
Before you install the WAVE-7541, WAVE-7571, and WAVE-8541, observe the following safety
warnings and cautions:
Warning
Read the installation instructions before connecting the system to the power source.
Statement
1004
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning
The plug-socket combination must be accessible at all times, because it serves as the main
disconnecting device.
Statement 1019
To Next Page
Loading...
