Cisco 7600 Series - Page 19

19
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
RSP720-3C-10GE
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version
RSP720-3C-10GE
7.33 A@42 V Route Switch Processor 720 with uplink ports:
• Two 10 Gigabit Ethernet (10-GE) uplink ports support
10-Gbps X2 modules
• Three Gigabit Ethernet (1-GE) uplink ports: two ports support
1-Gbps small form-factor pluggable (SFP) module; one port
supports 10/100/1000-Mbps RJ-45 connector
• Integrated 720-Gbps switch fabric
• PFC3C and MSFC4 with 512-MB bootflash, 4-MB
NVRAM, 4-MB ROMmon, and several DRAM options:
– Route processor (RP): 1- to 2-GB DRAM (default 1
GB)
– Switch processor (SP): 1- to 2-GB DRAM (default 1
GB)
• One CompactFlash Type II slot (on front panel) and one
2-GB internal CompactFlash (1 GB each for RP and SP)
• Requires larger power supplies and a high-speed fan tray
• QoS port architecture, 10-GE ports (Rx/Tx): 8q8t/1p7q8t
(CoS)
• QoS port architecture, 1-GE ports (Rx/Tx): 2q8t/1p3q8t
12.2(33)SRC
Software Version SFPs Supported
12.2(33) SRE1, 15.0(1)S CWDM-SFP-1470=