Cisco 7600 Series - Power Management

20
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
Note
•
Cisco IOS Release 12.2(33)SRE adds X2-DWDM and X2-10GB-LRM, X2 10GB-ZR support.
• There are no memory-only upgrade options for the RSP720-3C-10GE.
• The RSP720-3C-10GE does not support the following chassis and modules:
– Unsupported chassis: Cisco 7603 and 7606.
Note Cisco 7613 backplane supports RSP720-3C-10GE and RSP720-3CXL-10GE from
12.2(33)SRE2 onwards.
– Unsupported modules: Services modules (excluding the Network Analysis Module) , Optical
Service Modules (OSMs), FlexWAN module.
• The RSP720-3C-10GE supports the following 10-Gigabit Ethernet optics: X2-10GB-LR,
X2-10GB-ER, X2-10GB-SR, X2-10GB-CX4, and X2-10GB-LX4.
• The RSP720-3C-10GE supports the following Gigabit Ethernet optics: GLC-SX-MM,
GLC-LH-SM, GLC-ZX-SM, GLC-T, SFP-GE-S, SFP-GE-L, SFP-GE-T, GLC-BX-D, and
GLC-BX-U.
In Cisco IOS Release 12.2(33)SRE, the RSP720-10GE adds support for the following features:
• High-availability features such as NonStop Forwarding with Stateful Switchover (NSF/SSO) and
In-Service Software Upgrade (ISSU) are supported.
• The uplinks on the standby RSP720-10GE are active.
• Broadband Aggregation features are supported.
In Cisco IOS Release 12.2SRC, the RSP720-10GE does not support the following features, which are
supported on the RSP720:
CWDM-SFP-1490=
CWDM-SFP-1510=
CWDM-SFP-1530=
CWDM-SFP-1550=
CWDM-SFP-1570=
CWDM-SFP-1590=
CWDM-SFP-1610=
DWDM-SFP-3346=
DWDM-SFP-3739=
DWDM-SFP-4134=
DWDM-SFP-4532=
DWDM-SFP-4931=
DWDM-SFP-5332=
DWDM-SFP-5736=
DWDM-SFP-6141=
Software Version SFPs Supported