Cisco 7600 Series - Page 31

31
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version
WS-X6708-10G-3C
(WS-X6708-10GE with
WS-F6700-DFC3C)
10.58A @42 V 8-port 10-Gigabit Ethernet X2 module
• dCEF720
• Supports egress multicast replication
• QoS port architecture (Rx/Tx): 8q4t/1p7q4t
• Dual switch-fabric connections
Fabric Channel #1: Ports 2, 3, 6, 8
Fabric Channel #2: Ports 1, 4, 5, 7
• Number of ports: 8
Number of port groups: 8
Port ranges per port group: 1 port in each group
WS-X6708-10G-3CXL
(WS-X6708-10GE with
WS-F6700-DFC3CXL)
11.28A @ 42V
Supported only with Supervisor Engine 720, Route Switch
Processor 720, and RSP720-10GE.
12.2(33)SRC
X2 Modules Supported in
Gigabit Ethernet SPAs
X2-10GB-SR 12.2(33)SRC
X2-10GB-CX4 12.2(33)SRC
X2-10GB-LX4 12.2(33)SRC
X2-10GB-ER 12.2(33)SRC
X2-10GB-LR 12.2(33)SRC
X2-10GB-LRM 12.2(33)SRE
X2 10GB-ZR 12.2(33)SRE