Cisco 7861 Administration Guide

Programmable Softkeys
DescriptionParameter
Enables programmable softkeys.Programmable Softkey Enable
Softkeys that display when the phone is idle.Idle Key List
Softkeys that display when there is a missed call.Missed Call Key List
Softkeys that display when the phone is off-hook.Off Hook Key List
Softkeys that display when the user must enter dialing
data.
Dialing Input Key List
Softkeys that display when a call is attempting to
connect.
Progressing Key List
Softkeys that display when a call is connected.Connected Key List
Softkeys that display when a call transfer has been
initiated.
Start-Xfer Key List
Softkeys that display when a conference call has been
initiated.
Start-Conf Key List
Softkeys that display when a conference call is in
progress.
Conferencing Key List
Softkeys that display when a call is released.Releasing Key List
Softkeys that display when one or more calls are on
hold.
Hold Key List
Softkeys that display when a call is incoming.
To silence an incoming call, you can add Ignore
softkey.
Ringing Key List
Softkeys that display when a call is active on a shared
line.
Shared Active Key List
Softkeys that display when a call is on hold on a
shared line.
Shared Held Key List
Programmable softkey fields. Enter a string in these
fields to configure softkeys that display on the phone
screen. You can create softkeys for speed dials to
numbers or extensions, vertical service activation
codes (* codes), or XML scripts.
PSK 1 through PSK 16
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
277
Cisco IP Phone Troubleshooting
Programmable Softkeys

Cisco 7861 Specifications

General

Speakerphone	Yes
Wall Mountable	Yes
Protocols	SIP
Display	3.5-inch grayscale
PoE	Yes
Audio Codec	G.711, G.729, G.722, iLBC
Headset Port	Yes
Weight	1031 g
Line Keys	16 line keys