•
BAT and the Tool for Auto-Registered Phones Support (TAPS)
For general information about configuring phones in Cisco Unified Communications Manager, see the Cisco
Unified Communications Manager System Guide, “Cisco Unified IP Phones” chapter, and the Cisco Unified
Communications Manager Administration Guide, “Cisco Unified IP Phone Configuration” chapter.
Related Topics
Cisco Unified Communications Manager Phone Addition Methods
Set Up Cisco Unified IP Phone 7931G in Cisco Unified Communications Manager
The following steps provide an overview and checklist of configuration tasks for the Cisco Unified IP Phone
7931G in Cisco Unified Communications Manager Administration. The steps present a suggested order to
guide you through the phone configuration process. Some tasks are optional, depending on your system and
user needs. For detailed procedures and information, refer to the sources in the steps.
Procedure
Step 1
Gather this information about the phone:
•
Phone Model
•
MAC address
•
Physical location of the phone
•
Name or user ID of phone user
•
Device pool
•
Partition, calling search space, and location information
•
Number of lines and associated directory numbers (DNs) to assign to the phone
•
Cisco Unified Communications Manager user to associate with the phone
•
Phone usage information that affects phone button template, softkey template, phone features, IP Phone
services, or phone applications
Provides list of configuration requirements for setting up phones.
Identifies preliminary configuration that you need to perform before configuring individual phones, such as
phone button templates or softkey templates.
See the Cisco Unified Communications Manager System Guide, “Cisco Unified IP Phones” chapter, and
Telephony Features Available for Cisco Unified IP Phone.
Step 2
Customize phone button templates (if required). Lets you assign speed dials and features to programmable
line buttons to meet user needs.
You must specify a service URL with an IPv4 address.
See the Cisco Unified Communications Manager Administration Guide, “Phone Button Template Configuration”
chapter and Phone Button Templates.
Step 3
Add and configure the phone by completing these required fields in the Phone Configuration window:
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP
and SIP)
24
Cisco Unified IP Phone 7931G
Cisco Unified IP Phone Setup in Cisco Unified Communications Manager
To Next Page
Loading...
Need help?
General
Weight and Dimensions
