•
Phone type
•
MAC address
•
Device pool
•
Button template
•
Product Specific Configuration
•
Softkey template (if customized)
Adds the device with its default settings to the Cisco Unified Communications Manager database.
See the Cisco Unified Communications Manager Administration Guide, “Cisco Unified IP Phone Configuration”
chapter.
Step 4
Add and configure directory numbers (lines) on the phone by completing these required fields in the Directory
Number Configuration window.
•
Directory numbers
•
Partition
•
Multiple Calls and Call Waiting
•
Call Forwarding and Pickup (if used)
•
Voice Messaging (if used)
Adds primary and secondary directory numbers and features associated with directory numbers to the phone.
See the Cisco Unified Communications Manager Administration Guide, “Directory Number Configuration”
chapter and Telephony Features Available for Cisco Unified IP Phone.
Step 5
Customize softkey templates.
Adds, deletes, or changes order of softkey features that display on the phone.
See the Cisco Unified Communications Manager Administration Guide, “Softkey Template Configuration”
chapter and Softkey Templates.
Step 6
Configure speed-dial buttons and assign speed-dial numbers (optional). Adds speed-dial buttons and numbers.
Users can change speed-dial settings on their phones by using Cisco Unified Communications
Manager.
Note
See the Cisco Unified Communications Manager Administration Guide, “Cisco Unified IP Phone Services
Configuration” chapter.
Step 7
Configure Cisco Unified IP Phone services and assign services (optional).
Provides IP Phone services.
Users can add or change services on their phones by using Cisco Unified Communications Manager
User Options.
Note
You must specify a service URL with an IPv4 address.
See the Cisco Unified Communications Manager Administration Guide, “Cisco Unified IP Phone Services
Configuration” chapter and Services Setup.
Step 8
Assign services to phone buttons (optional).
Provides single button access to an IP phone service or URL.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
25
Cisco Unified IP Phone 7931G
Cisco Unified IP Phone Setup in Cisco Unified Communications Manager
To Next Page
Loading...
