Cisco 7937G - Unified IP Conference Station VoIP Phone - Page 110

A-4
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
Appendix A Providing Information to Users Via a Website
How Users Configure Personal Directory Entries
To configure the synchronizer, follow these steps:
Procedure
Step 1 Open the synchronizer application.
If you accepted the default installation directory, open the application by choosing Start > Programs >
Cisco Systems, Inc > Tabs ync.
If you chose a different directory, navigate to the installation directory, open the Tabsync folder, and then
double-click tabsync.exe.
A Warning dialog box appears.
Step 2 Click OK.
The Cisco Unified Communications Manager Address Book Synchronizer window appears.
Step 3 Click User.
The Cisco Unified Communications Manager User Information dialog box appears.
Step 4 Do the following:
a. In the User Identification field, enter your Cisco Unified Communications Manager User Options
username.
b. In the User Password field, enter your Cisco Unified Communications Manager User Options
password.
Note If you do not know your username or password, contact your system administrator.
c. Click OK.
The Cisco Unified Communications Manager Address Book Synchronizer window appears.
Step 5 To configure synchronization rules, click Synchronization Rules.
The Synchronization Rules dialog box appears.
Step 6 Select the synchronization rule that you want to use, and then click OK.
The Cisco Unified Communications Manager Address Book Synchronizer window appears.
Step 7 To configure Cisco Unified Communications Manager information, click CCM Server.
The Configure Cisco Unified Communications Manager Server Information dialog box appears.
Step 8 In the Host Name or IP Address field, enter the host name or IP address of
Cisco
Unified Communications Manager, and then click OK.
Note If you do not have this information, contact your system administrator.
The Cisco Unified Communications Manager Address Book Synchronizer window appears.
Step 9 To start the directory synchronization process, click Synchronize.
During synchronization, if you chose the user intervention for duplicate entries rule and you have
duplicate address book entries, you can choose the entry that you want to include in your
Personal
Address Book.
When synchronization completes, click Exit to close the synchronizer.