Cisco 7937G - Unified IP Conference Station VoIP Phone - Customizing the Conference Station; Customizing and Modifying Configuration Files

CHAPTER
6-1
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
6
Customizing the Conference Station
This chapter explains how you customize configuration files, Cisco Unified IP Conference
Station
7937G ring sounds, and the idle display at your site. Ring sounds play when the conference
station receives a call. The idle display appears on the LCD screen when the conference station has not
been used for a designated period.
This chapter includes these topics:
• Customizing and Modifying Configuration Files, page 6-1
• Creating Custom Conference Station Rings, page 6-2
• Configuring the Idle Display, page 6-4
Customizing and Modifying Configuration Files
You can modify configuration files (for example, edit the xml files) and add customized files
(for
example, custom ring tones and call back tones) to the Trivial File Transfer Protocol (TFTP)
directory. You can modify files and add customized files to the TFTP directory in Cisco IPT Platform
Administration from the TFTP Server File Upload page. Refer to Cisco
Unified Communications
Operating System Administration Guide for information about how to upload files to the TFTP folder in
Cisco Unified Communications Manager.
You can obtain a copy of the Ringlist.xml and List.xml files from the system using the following
admin
command-line interface (CLI) “file” commands:
• admin:file
– file list*
– file view*
– file search*
– file get*
– file dump*
– file tail*
– file delete*