Cisco 7937G - Unified IP Conference Station VoIP Phone - Device Information

8-3
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
Chapter 8 Monitoring the Conference Station Remotely
Device Information
To enable or disable access to the web pages for a conference station, follow these steps from
Cisco
Unified Communications Manager Administration:
Procedure
Step 1 Choose Device > Phone.
Step 2 Specify the criteria to find the phone and click Find, or click Find to display a list of all phones.
Step 3 Click the device name to open the Phone Configuration web page for the device.
Step 4 In the Product Specific Configuration Layout area, do the following:
• From the Web Access drop-down list, choose Enabled or Disabled.
Step 5 Click Update.
Note Some features, such as Cisco Quality Report Tool, do not function properly without access to
the conference station web pages. Disabling web access also affects any serviceability
application that relies on web access, such as CiscoWorks.
Device Information
The Device Information area on a conference station’s web page displays device settings and related
information for the conference station.
Table 8-1 describes these items.
To display the Device Information area, access the web page for the conference station as described in
the
“Accessing the Web Page for a Conference Station” section on page 8-2, and then click the
Device Information hyperlink.
Ta b l e 8-1 Device Information Area Items
Item Description
MAC Address Media Access Control (MAC) address of the conference station.
Host Name Unique, fixed name that is automatically assigned to the conference station
based on its MAC address.
Phone DN Directory number assigned to the conference station.
App Load ID Identifier of the firmware running on the conference station.
Boot Load ID Identifier of the factory-installed load running on the conference station.
Ve r s i o n Version of the firmware running on the conference station.
Hardware Revision Revision value of the conference station hardware.
Serial Number Serial number of the conference station.
Model Number Model number of the conference station.
Message Waiting Indicates if there is a voice message waiting for this conference station.