Cisco 7937G - Unified IP Conference Station VoIP Phone - Preface; Overview; Audience; Organization

ix
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
Preface
Overview
The Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified
Communications Manager 6.0 provides the information you need to understand, install, configure,
manage, and troubleshoot the Cisco Unified IP Conference Station 7937G on a Voice-over-IP (VoIP)
network.
Because of the complexity of a Unified Communications network, this guide does not provide complete
and detailed information for procedures that you need to perform in Cisco
Unified Communications
Manager 6.0 or other network devices. See the
“Related Documentation” section on page x for a list of
related documentation.
Audience
Network engineers, system administrators, or telecom engineers should review this guide to learn the
steps required to properly set up the conference station on the network.
The tasks described are administration-level tasks and are not intended for end-users of the
conference
stations. Many of the tasks involve configuring network settings and affect the
conference
station’s ability to function in the network.
Because of the close interaction between the conference station and Cisco Unified Communications
Manager, many of the tasks in this manual require familiarity with Cisco
Unified Communications
Manager.
Organization
This manual is organized as follows:
Chapter Description
Chapter 1, “An Overview of the Conference
Station”
Provides a conceptual overview and description of the conference station
Chapter 2, “Preparing to Install the Conference
Station on Your Network”
Describes how to install the conference station, and provides an overview
of the tasks required prior to installation