Cisco 7937G - Unified IP Conference Station VoIP Phone - Page 4

Contents
iv
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
Providing Power to the Conference Station 2-2
Power Guidelines 2-3
Conference Station Power Consumption and Display Brightness 2-3
Power Outage 2-4
Obtaining Additional Information about Power 2-4
Understanding Conference Station Configuration Files 2-4
Understanding the Conference Station Startup Process 2-5
Adding Conference Stations to the Cisco Unified Communications Manager Database 2-7
Adding Conference Stations with Auto-Registration 2-7
Adding Conference Stations with Auto-Registration and TAPS 2-8
Adding Conference Stations with Cisco Unified Communications Manager Administration 2-9
Adding Conference Stations with BAT 2-9
Determining the MAC Address of a Conference Station 2-9
CHAPTER 3 Setting Up the Conference Station 3-1
Before You Begin 3-1
Network Requirements 3-1
Cisco Unified Communications Manager Configuration 3-2
Safety 3-2
Understanding the Conference Station Components 3-3
Network Ports 3-3
Audio Auxiliary Port 3-4
Installing the Conference Station 3-4
Securing the Conference Station with a Cable Lock 3-7
Verifying the Conference Station Startup Process 3-8
Configuring Startup Network Settings 3-9
Guidelines for Best Performance 3-9
Conference Room Setup Examples 3-10
CHAPTER 4 Configuring Settings on the Conference Station 4-1
Configuration Menus on the Conference Station 4-1
Displaying a Configuration Menu 4-2
Unlocking and Locking Options 4-3
Editing Values 4-3
Overview of Options Configurable from a Conference Station 4-4
Network Configuration Menu 4-5