4-36
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
Table 4-23 describes 802.1X Authentication Real-Time Status.
Ta b l e 4-23 802.1X Authentication Real-Time Status
Option Description To Change
802.1X Authentication
Status
Real-time progress of the 802.1X authentication status,
displaying one of the following states:
• Disabled—802.1X is disabled and transaction was not
attempted
• Disconnected—Physical link is down or disconnected
• Connecting—Trying to discover or acquire the
authenticator
• Acquired—Authenticator acquired, awaiting
authentication to begin
• Authenticating—Authentication in progress
• Authenticated—Authentication successful or implicit
authentication due to timeouts
• Held—Authentication failed, waiting before next attempt
(approximately 60 seconds)
Display only—Cannot configure.
To Next Page
Loading...
