Cisco 7945G Administration Guide

4-15
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-2
• Device Configuration Menu, page 4-11
Call Preferences Menu (SIP Phones Only)
The Call Preferences menu displays settings that relate to the settings for the call preferences on a SIP
phone.
Table 4-8 describes the options in this menu.
Proxy Address The value is left blank because it is not applicable to SIP
phones that are using Cisco Unified Communications
Manager.
Display only—Cannot configure.
Proxy Port The value is left blank because it is not applicable to SIP
phones that are using Cisco Unified Communications
Manager.
Display only—Cannot configure.
Shared Line Displays if the line is part of a shared line (Yes) or not
(No).
Display only—Cannot configure.
Table 4-7 Line Settings Menu Options (continued)
Option Description To Change
Ta b l e 4-8 Call Preferences Menu Options
Option Description To Change
Caller ID Blocking Indicates whether caller ID blocking is enabled (Yes)
or disabled (No) for the phone.
From Cisco Unified Communications
Manager Administration, choose Device
>
Device Settings > SIP Profile.
Anonymous Call Block Indicates whether anonymous call block is enabled
(Yes) or disabled (No) for the phone.
From Cisco Unified Communications
Manager Administration, choose Device
>
Device Settings > SIP Profile.
Call Waiting
Preferences
Displays a sub-menu that indicates whether call
waiting is enabled (Yes) or disabled (No) for each
line.
Use Cisco Unified Communications
Manager Administration to modify.
Call Hold Ringback Indicates whether the call hold ringback feature is
enabled (Yes) or disabled (No) for the phone.
From Cisco Unified Communications
Manager Administration, choose Device
>
Device Settings > SIP Profile.
Stutter Msg Waiting Indicates whether stutter message waiting is enabled
(Yes) or disabled (No) for the phone.
From Cisco Unified Communications
Manager Administration, choose Device
>
Device Settings > SIP Profile.
Call Logs BLF Enabled Indicates whether BLF for call logs is enabled (Yes)
or disabled (No) for the phone.
Use Cisco Unified Communications
Manager Administration to modify.

Cisco 7945G Specifications

General

Protocols	SCCP, SIP
Headset	Dedicated headset port
Speakerphone	Full-duplex speakerphone
Display	5-inch 320x240 pixel color display
Audio	Wideband audio support
Network	10/100 Ethernet switch
Power	IEEE 802.3af PoE
Lines	2 lines
Codecs	G.711, G.729a, G.722, iLBC
Weight	1 kg