xi
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Preface
Overview
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications
Manager 6.1(3) provides the information you need to understand, install, configure, manage, and
troubleshoot the phones in the Cisco Unified IP Phone 7965G and 7945G on a Voice-over-IP (VoIP)
network.
Because of the complexity of an IP telephony network, this guide does not provide complete and detailed
information for procedures that you need to perform in Cisco
Unified Communications Manager or
other network devices.
Audience
Network engineers, system administrators, or telecom engineers should review this guide to learn the
steps required to properly set up the Cisco Unified IP Phone 7965G and 7945G on the network.
The tasks described are administration-level tasks and are not intended for end-users of the phones.
Many of the tasks involve configuring network settings and affect the phone’s ability to function in the
network.
Because of the close interaction between the Cisco Unified IP Phone and
Cisco
Unified Communications Manager, many of the tasks in this manual require familiarity with
Cisco
Unified Communications Manager.
Organization
This manual is organized as follows:
Chapter 1, “An Overview of the Cisco
Unified IP Phone”
Provides a conceptual overview and description of
the Cisco
Unified IP Phone.
Chapter 2, “Preparing to Install the Cisco
Unified IP Phone on Your Network”
Describes how the Cisco Unified IP Phone
interacts with other key IP telephony components,
and provides an overview of the tasks required
prior to installation.
To Next Page
Loading...
Need help?
General
