Cisco 7945G Administration Guide

6-9
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Chapter 6 Customizing the Cisco Unified IP Phone
Automatically Disabling the Cisco Unified IP Phone Screen
Display On
Duration
Length of time that the display remains on after turning on
at the time specified in the Display On Time field.
Enter the value in this field in the format hours:minutes.
For example, to keep the display on for 4 hours and 30
minutes after it turns on automatically, enter 4:30.
If this field is blank, the phone will turn off at the end of
the day (0:00).
Note If Display On Time is 0:00 and the display on
duration is blank (or 24:00), the display will remain
on continuously.
Display Idle
Timeout
Length of time that the phone is idle before the display
turns off. Applies only when the display was off as
scheduled and was turned on by an end-user (by pressing a
button on the phone or lifting the handset).
Enter the value in this field in the format hours:minutes.
For example, to turn the display off when the phone is idle
for 1 hour and 30 minutes after an end-user turns the
display on, enter 1:30.
The default value is 0:30.
Display On If
Incoming Call
Disable/enable automatic illumination of the LCD screen
when a call is received.
Default: Disabled
Table 6-1 Display On and Off Configuration Fields (continued)
Field Description

Cisco 7945G Specifications

General

Protocols	SCCP, SIP
Headset	Dedicated headset port
Speakerphone	Full-duplex speakerphone
Display	5-inch 320x240 pixel color display
Audio	Wideband audio support
Network	10/100 Ethernet switch
Power	IEEE 802.3af PoE
Lines	2 lines
Codecs	G.711, G.729a, G.722, iLBC
Weight	1 kg