B-1
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
APPENDIX
B
Feature Support by Protocol for the Cisco Unified
IP Phone 7965G and 7945G
This appendix provides information about feature support for the Cisco Unified IP Phone 7965G and
7945G using the SCCP or SIP protocol with Cisco
Unified Communications Manager Release 6.1(3).
Table B-1 provides a high-level overview of calling features and their support by protocol. This table
focuses primarily on end-user calling features and is not intended to represent a comprehensive listing
of all available phone features.
Table B-1 also provides references to appropriate sections in Cisco Unified IP Phone 7965G and 7945G
Phone Guide for Cisco Unified Communications Manager 6.1(3), which is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
Ta b l e B-1 Cisco Unified IP Phone 7965G and 7945G Feature Support by Protocol
Features
Cisco Unified IP Phone 7965G
and 7945G
For More InformationSCCP SIP
Calling Features
Abbreviated Dialing Supported Supported “Basic Call Handling—Placing a Call: Additional
Options”
Answer Release Supported Supported
Audible Message Waiting Indicator Supported Supported “Accessing Voice Messages”
Auto Answer Supported Supported “Using a Handset, Headset, and
Speakerphone—Using Auto Answer”
Auto Dial Supported Supported “Basic Call Handling—Placing a Call: Basic
Options”
Barge (and cBarge) Supported Supported “Advanced Call Handling—Using a Shared Line”
Busy Lamp Field (BLF) Call Lists Supported Supported “Advanced Call Handling—Determining if Another
Line is Busy or Idle”
Busy Lamp Field (BLF) Speed Dial Supported Supported “Advanced Call Handling—Determining if Another
Line is Busy or Idle”
Busy Lamp Field (BLF) Speed Dial Supported Supported “Advanced Call Handling—Using BLF to Determine
a Line State”
To Next Page
Loading...
Need help?
General
