EasyManuals Logo

Cisco 7945G Administration Guide

Cisco 7945G
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
1-23
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
Step 5
Configure these network settings on the phone by
choosing Settings > Network Configuration.
To enable DHCP:
Set DHCP Enabled to Yes
To use an alternate TFTP server, set Alternate
TFTP Server to Yes
Enter IP address for TFTP Server 1
To disable DHCP:
Set DHCP Enabled to No
Enter static IP address for phone
Enter subnet mask
Enter default router IP addresses
Enter domain name where phone resides
Set Alternate TFTP Server to Yes
Enter IP address for TFTP Server 1.
Using DHCP—The IP address is automatically
assigned, and the Cisco Unified
IP Phone is directed
to a TFTP Server.
Note Consult with the network administrator if you
need to assign an alternative TFTP server
instead of using the TFTP server assigned by
DHCP.
Without DHCP—You must configure the IP address,
TFTP server, subnet mask, domain name, and default
router locally on the phone.
See the “Configuring Startup Network Settings” section
on page 3-14.
See the “Network Configuration Menu” section on
page 4-5.
Step 6
Set up security on the phone.
Provides protection against data tampering threats and
identity theft of phones.
See the “Configuring Security on the Cisco Unified IP
Phone” section on page 3-14.
Step 7
Make calls with the Cisco Unified IP Phone.
Verifies that the phone and features work correctly.
Refer to Cisco Unified IP Phone 7965G and 7945G
Guide for Cisco Unified Communications Manager 6.0
(SCCP and SIP)
Step 8
Provide information to end users about how to use
their phones and how to configure their phone options.
Ensures that users have adequate information to
successfully use their Cisco Unified
IP Phones.
See Appendix A, “Providing Information to Users Via a
Website.
Table 1-7 Checklist for Installing the Cisco Unified IP Phone 7965G and 7945G (continued)
Configuration Step and Purpose For More Information

Table of Contents

Other manuals for Cisco 7945G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7945G and is the answer not in the manual?

Cisco 7945G Specifications

General IconGeneral
ProtocolsSCCP, SIP
HeadsetDedicated headset port
SpeakerphoneFull-duplex speakerphone
Display5-inch 320x240 pixel color display
AudioWideband audio support
Network10/100 Ethernet switch
PowerIEEE 802.3af PoE
Lines2 lines
CodecsG.711, G.729a, G.722, iLBC
Weight1 kg

Related product manuals