4-19
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Auto Call Select Indicates whether the phone automatically shifts the call
focus to an incoming call on the same line when the user is
already on a call.
When this option is enabled, the phone shifts the call focus
to the most recent incoming call.
When this option is disabled, all automatic focus changes,
including Auto Line Select, are disabled regardless of their
setting.
Default: Enabled
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
“more” Softkey
Timer
Indicates the number of seconds that additional softkeys are
displayed after the user presses more. If this timer expires
before the user presses another softkey, the display reverts
to the initial softkeys.
Range: 5 to 30; 0 represents an infinite timer.
Default: 5
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
Wideband Headset
UI Control
Indicates whether the user can configure the Wideband
Headset option in the phone user interface.
Va l u e s:
• Enabled—The user can configure the Wideband
Headset option in the Audio Preferences menu on the
phone (choose
> User Preferences > Audio
Preferences> Wideband Headset).
• Disabled—The value of the Wideband Headset option
in Cisco Unified Communications Manager
Administration gets used (see
Media Configuration
Menu, page 4-20).
Default: Enabled
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
Single Button
Barge (SCCP
phones only)
Allows users to press a line key to Barge or cBarge into a
remote-in-use call on a shared line.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
Personalization Indicates whether the phone has been enabled for
configuring custom ring tones and wallpaper images.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
Table 4-12 UI Configuration Menu Options (continued)
Option Description To Change
To Next Page
Loading...
Need help?
General
