4-28
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
CDP: PC Port Indicates whether CDP is supported on the PC port
(default is enabled).
Enable CDP on the PC port when Cisco VT
Advantage/Unified Video Advantage (CVTA) is
connected to the PC port. CVTA does not work without
CDP interaction with the phone.
Note When CDP is disabled in Cisco Unified
Communications Manager, a warning is
displayed, indicating that disabling CDP on the
PC port prevents CVTA from working.
Note The current PC and switch port CDP values are
shown on the Settings menu.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone.
CDP: SW Port Indicates whether CDP is supported on the switch port
(default is enabled).
• Enable CDP on the switch port for VLAN
assignment for the phone, power negotiation, QoS
management, and 802.1x security.
• Enable CDP on the switch port when the phone is
connected to a Cisco switch.
Note When CDP is disabled in Cisco Unified
Communications Manager, a warning is
presented, indicating that CDP should be
disabled on the switch port only if the phone is
connected to a non-Cisco switch.
Note The current PC and switch port CDP values are
shown on the Settings menu.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone.
Table 4-18 Network Configuration Menu Options (continued)
Option Description To Change
To Next Page
Loading...
Need help?
General
