Cisco 7945G

4-30
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-2
• Network Configuration Menu, page 4-5
LLDP-MED: SW
Port
Enables and disables Link Layer Discovery Protocol
Media Endpoint Discovery (LLDP-MED) on the switch
port. Use this setting to force the phone to use a specific
discovery protocol, which should match the protocol
supported by the switch. Settings include:
• Enabled—default
• Disabled
From Cisco Unified Communications
Manager Administration, choose
Device
> Phone > Phone
Configuration
LLDP Power
Priority
Advertises the phone’s power priority to the switch,
enabling the switch to appropriately provide power to
the phones. Settings include:
• Unknown—default
• Low
• High
• Critical
From Cisco Unified Communications
Manager Administration, choose
Device
> Phone > Phone
Configuration
LLDP Asset ID Identifies the asset ID assigned to the phone for
inventory management.
From Cisco Unified Communications
Manager Administration, choose
Device
> Phone > Phone
Configuration
Table 4-18 Network Configuration Menu Options (continued)
Option Description To Change