Cisco 7961G User Manual

DescriptionItem
Opens and closes the Services menu.Services button8
Controls the handset, headset, and speakerphone volume (off-hook) and the ringer volume
(on-hook).
Volume button9
Toggles the speakerphone on or off. When the speakerphone is on, the button is lit.
Selects the speakerphone as the default audio path and initiates a new call, picks up an
incoming call, or ends a call. During a call, the button is lit green.
The speakerphone audio path does not change until you select a new default audiopath
(for example, by picking up the handset).
If external speakers are connected, the Speakerphone button uses these speakers as the
default audio path.
Speaker button10
Toggles the microphone on or off. When the microphone is muted, the button is lit.Mute button11
Toggles the headset on or off. When the headset is on, the button is lit.
Selects the headset as the default audio path and initiates a new call, picks up an incoming
call, or ends a call. During a call, the button is lit green.
A headset icon in the phone screen header line indicates that the headset is the default
audio path. This audio path does not change until you select a new default audio path (for
example, by picking up the handset).
Headset button12
Enables you to scroll through menus and highlight items. When the phone is on-hook,
displays phone numbers from your Placed Calls log.
Navigation button13
Enables you to dial phone numbers, enter letters, and choose menu items.Keypad14
Each button activates a softkey option (displayed on your phone screen).Softkey buttons15
Indicates an incoming call or new voice message.Handset light strip16
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
5
Phone Features
Buttons and Hardware Identification

Cisco 7961G Specifications

General

Brand	Cisco
Model	7961G
Category	IP Phone
Language	English