Cisco 7961G User Manual

Set Up or Cancel Call Forwarding
When call forwarding is enabled for any line other than the primary line, your phone does not provide you
with confirmation that calls are being forwarded. Instead, you must confirm your settings in the User Options
web pages.
Procedure
Step 1
Log in to your User Options web pages.
Step 2
Access your call forwarding settings.
Set Up and Cancel Call Forward All from Phone
Procedure
Step 1
To set Call Forward All, press CFwdALL or Forward All and enter a target phone number.
Step 2
To cancel Call Forward All, press CFwdALL or Forward All.
Do Not Disturb
Do Not Disturb (DND) turns off all audible and visual notifications of incoming calls. Your system administrator
enables DND on your phone.
When DND and Call Forward are enabled on your phone, calls forwards immediately and the caller does not
hear a busy tone.
DND interaction with other types of calls includes:
•
DND does not affect intercom calls or nonintercom priority calls.
•
If both DND and AutoAnswer are enabled, only intercom calls autoanswer.
•
When you switch an in-progress call from your mobile phone to Cisco Unified phones that share the
same line (Session Handoff), the phone disables the DND feature. The DND feature returns when the
call ends.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
35
Calling Features
Set Up or Cancel Call Forwarding

Cisco 7961G Specifications

General

Brand	Cisco
Model	7961G
Category	IP Phone
Language	English