Cisco Unified IP Phone 7965G and 7945G for Cisco Unified Communications Manager 6.0 (SCCP and SIP) 29
Tips
• When DND is active, DND blocking is applied to all the lines on your phone.
• When DND and Call Forward All are both enabled on your phone, Call Forward All takes
precedence on incoming calls. That is, calls will be forwarded and the caller will not hear a busy
tone.
• Intercom and Multilevel Precedence and Preemption (MLPP), park reversion and hold reversion
all override DND.
• Your system administrator enables the DND feature on your phone.
Making Conference Calls
Your Cisco Unified IP Phone allows you to join three or more people into one telephone conversation,
creating a conference call.
Understanding Types of Conference Calls
There are two types of conference calls: Standard (ad hoc) and Meet-Me.
Standard Conference Calls
You can create a standard conference in different ways, depending on your needs and the
programmable buttons or softkeys available on your phone:
• Confrn or Conference —Use this softkey to establish a standard conference by calling each
participant. Standard conference calling is a default feature available on most phones.
• Join—Use this softkey to establish a standard conference by joining several calls already on one
line.
Turn off DND Press Do Not Disturb or DND.
Customize DND settings If your system administrator configured DND settings to appear
on the User Options page, follow these steps:
1. Log in to your User Options web pages. See Accessing Your
User Options Web Pages, page 57.
2. From the drop-down menu, choose User Options > Device.
3. You can set the following options
• Do Not Disturb—Turn DND on/off.
• DND Incoming Call Alert—Set the alert to beep
only, flash only, or disable all visible and audible alert
notifications.
To Next Page
Loading...
Need help?
General
