Cisco 7965G

Cisco Unified IP Phone 7965G and 7945G for Cisco Unified Communications Manager 6.0 (SCCP and SIP) 31
Tips
• Calls must be on the same line before you can add them to a conference. If calls are on different
lines, transfer them to a single line before using Confrn, Conference, or Join. (Join is on SCCP
phones only.)
• Depending on how your phone is configured, if you leave a conference after initiating it, the
conference might end. To avoid this, transfer the conference before hanging up.
• To start a secure conference, you must use a phone configured with security.
• Non-secure conferences and participants display a icon.
View a list of conference
participants
1. Highlight an active conference.
2. Press ConfList or Conference List.
Participants are listed in the order in which they join the conference
with the most recent additions at the top.
Get an updated list of
conference participants
While viewing the conference list, press Update.
See who started the
conference
While viewing the conference list, locate the person listed at the
bottom of the list with an asterisk (*) next to the name.
Remove any conference
participant
1. While viewing the conference list, highlight the participant’s
name.
2. Press Remove.
Drop the last party added to
the conference
While viewing the conference list, press RmLstC or Remove Last
Participant.
End your participation in a
standard conference
Hang up or press EndCall.
Join together two standard
conferences on the same line
On SCCP phones, use the Join or DirTrfr softkeys.
On SIP phones, use the Confrn or Transfer softkeys.
Check with your system administrator to see if this feature is
available to you.
Verify that a conference call is
secure
Look for the or icon after “Conference” on the phone
screen.
Remove a non-secure
participant from a conference
While viewing the Conference List, locate the participant without the
or icon, and press Remove.
Check with your system administrator to see if non-initiators of a
conference can remove participants.
If you want to... Then...