Cisco 8620 User Manual

1-15
Cisco Video Surveillance 8620/8630 IP Camera Reference Guide
Chapter 1 Getting Started
Hardware Installation
Note The diameter of the hex lock nut of the conduit connector should not be larger than 35mm.
Step 11 Install the camera to ceiling using the included screws. Pass the screw heads through the keyhole slots,
turn the camera counter-clockwise, and then fasten the screws.
Step 12 Access the camera web-based user interface and, with a live view, adjust the camera's shooting direction
by changing the pan, tilt, and rotation angle.
You can use the Cisco IP Camera Setup Software to obtain the IP address of the camera, which you need
to access the camera. You also can use this tool to perform the basic camera set up. For instructions, see
Cisco IP Camera Setup Software Reference Guide at:

Cisco 8620 Specifications

General

Brand	Cisco
Model	8620
Category	Security Camera
Language	English