Statement 1006—Chassis Warning for Rack-Mounting and Servicing
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
unit in the rack.
Warning
Statement 1096—Headset Warning
High Sound Pressure—Avoid listening to high volume levels for long periods to prevent possible hearing
damage.
Warning
Statement 1098—Lifting Requirement
people are required to lift the heavy parts of the product. To prevent injury, keep your back straight and lift
with your legs, not your back.
Warning
Statement 4023—Product Usage Restrictions
This product is designed for indoor usage only. Outdoor usage is not permitted.
Note
Mount Cisco 8711-32FH-M Router in a 2-Post Rack with Sliders
This section describes how to use the rack-mount kit provided with the 8711-32FH-M router, to install the
chassis into a cabinet or a 2-post 19-inch rack.
If the rack is on wheels, ensure that the brakes are engaged or that the rack is otherwise stabilized.
Caution
For a complete list of items contained in the 2-post rack-mount kit (8700-1RU-2P-KIT) provided with the
router, see Router Accessory Kits.
Before you begin
To install the router on a 23-inch rack, install the bracket mounting adapter on the 23-inch rack post (see
Install the Bracket Mounting Adapter on 23-inch Rack Post ) and then continue with this procedure.
Hardware Installation Guide for Cisco 8700 Series Routers
35
Unpack and Install the Chassis
Mount Cisco 8711-32FH-M Router in a 2-Post Rack with Sliders
To Next Page
