Figure 41: Install the Grounding Pad
Screws2Grounding pad1
Mount the Cisco 8712-MOD-M Chassis in a 4-Post Rack with Sliders
This section describes how to use the rack-mount kit provided with the CIsco 8712-MOD-M chassis, to install
the chassis into a cabinet or a 4-post 19-inch rack.
If the rack is on wheels, ensure that the brakes are engaged or that the rack is otherwise stabilized.
Caution
The following table lists the items contained in the rack-mount kit provided with the routers.
Table 11: 4 Post Rack-Mount Kit - NC57-2RU-ACC-KIT (19 inch) and NC57-2RU-ACC-KIT3 (23 inch)
Part DescriptionQuantity
Slider assembly - left and right2
Slider brackets - left and right2
Hardware Installation Guide for Cisco 8700 Series Routers
50
Unpack and Install the Chassis
Mount the Cisco 8712-MOD-M Chassis in a 4-Post Rack with Sliders
To Next Page
