Cisco 8700 Series - Page 74

Power Cord RatingLengthPart NumberLocale
10A, 250 VAC14 ft (4.26
m)
CAB-AC-10A-EUEurope
10A, 250 VAC14 ft (4.26
m)
CAB-AC-10A-ITAItaly
10A, 250 VAC14 ft (4.26
m)
CAB-AC-10A-JPN1Japan
10A, 250 VAC14 ft (4.26
m)
CAB-AC-10A-JPN2Japan
10A, 250 VAC14 ft (4.26
m)
CAB-AC-10A-KORKorea
13A, 125 VAC14 ft (4.26
m)
CAB-AC-10A-NANorth America
10A, 250 VAC14 ft (4.26
m)
CAB-AC-10A-CHESwitzerland
13A, 250 VAC14 ft (4.26
m)
CAB-C15-CBNCabinet Jumper Power Cord, 250 VAC 13A,
C14-C15 Connectors
Figure 53: CAB-AC-10A-NA
For a 2KW DC PSU, use the cable (PID: PWR-2KW-DC-CBL) supplied with the power supply. You can
purchase power supply cord separately from Cisco.
Note
Hardware Installation Guide for Cisco 8700 Series Routers
68
Powering on the Router
AC/DC-Input Power Cord Options