QuantityComponent
2 AC or 2 DCPower module
Cisco 8711-32FH-M
The Cisco 8711-32FH-M is a P100 silicon chip-based router that provides 12.8 Tbps of network bandwidth.
The Cisco 8711-32FH-M is a fixed-port, high density, one rack-unit form factor router. Supported ports
include 32 QSFP56-DD 400GbE ports. It includes HBM/2.5D for advanced performance, and supports Cisco
400GbE Digital Coherent Optical Modules.
Cisco 8711-32FH-M Router Front View
The front of the chassis has the following:
• 32 x QSFP56-DD 400GbE ports or 16 x 800G QSFP-DD800 ports
Each of these ports can support 2x400GbE or 1x800G traffic. You can have any
combination of the available 400GbE or 800G ports that must not exceed the
total bandwidth of 12.8 Tbps. All the 400GbE ports support breakout operation.
Note
Figure 3: Cisco 8711-32FH-M - Front View
32 QSFP56-DD 400GbE ports
Note
The top row is 16 x 800G QSFP-DD800 capable ports.
1
Cisco 8711-32FH-M Router Rear View
This table details the modules available in the rear of the chassis:
Hardware Installation Guide for Cisco 8700 Series Routers
3
Cisco 8700 Series Routers Overview
Cisco 8700 Series Routers
To Next Page
