Cisco 8800 Series Administration Guide

DescriptionParameter
Displays information about the custom CA:
• Installed—Displays the “CN Value”, where “CN
Value” is the value of the CN parameter for the
Subject field in the first certificate.
• Not Installed—Displays if no custom CA
certificate is installed.
Custom CA Info
Custom CA certificates are configured in the Provisioning tab. For more information about custom CA
certificates, see the Cisco IP Phone 8800 Series Multiplatform Phones Provisioning Guide.
Attendant Console Status
General
DescriptionParameter
Displays the time when subscription of the key
expansion module that is added to the phone will
expire.
Subscribe Expires
Displays the time when subscription of the key
expansion module that is added to the phone will try
to subscribe again.
Subscribe Retry Interval
Unit
Enter the programming information for each line key for the Attendant Console unit.
DescriptionParameter
Indicates whether the key expansion module that is
added to the phone is enabled.
Unit Enable
Indicates whether the key expansion module that is
added to the phone is active.
Unit Online
Displays the hardware version of the key expansion
module that is added to the phone..
HW Version
Displays the software version of the key expansion
module that is added to the phone.
SW Version
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
258
Cisco IP Phone Troubleshooting
Attendant Console Status

Cisco 8800 Series Specifications

General

Protocols	SIP, SCCP
Audio	Wideband audio
Connectivity	Gigabit Ethernet
Power	Power over Ethernet (PoE)
Bluetooth	Yes
USB	Yes
Codec Support	G.711, G.722, G.729, iLBC
Dimensions	Varies by model
Weight	Varies by model
Wi-Fi	Yes (varies by model)