Cisco 8800 Series Administration Guide

DescriptionDefaultField Type or
Choices
Field
See Set Up Wireless LAN from the Phone, on page 46
For 8861 only.
Wi-Fi configuration
See the IPv4 address submenu table in the following tables.DHCPDHCP
Static IP
Release DHCP IP
IPv4 address settings
See the IPv6 address submenu table in the following tables.DHCPDHCP
Static IP
IPv6 address settings
Indicates the order in which the phone uses the IPv6 addresses
provided by DHCP server.
17, 160, 159DHCPv6 option to
use
Indicates whether the phone has web server enabled or disabled.OnOn
Off
Web server
Table 9: Ethernet Configuration Submenu
DescriptionDefaultField Type
or Choices
Field
Enables you to turn on or turn off the 802.1x authentication. Valid
options are:
• On
• Off
OffDevice
authentication
802.1x
authentication
• Transaction status—Indicates different authentication status
when you turn on 802.1x in the Device authentication field.
• Disabled—Default status.
• Connecting—802.1x authentication started in the
device.
• Authenticated—802.1x authentication established in
the device.
• Protocol—Specifies the protocol of the server.
DisabledTransaction status
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
41
Cisco IP Phone Installation
Network Configuration Fields

Cisco 8800 Series Specifications

General

Protocols	SIP, SCCP
Audio	Wideband audio
Connectivity	Gigabit Ethernet
Power	Power over Ethernet (PoE)
Bluetooth	Yes
USB	Yes
Codec Support	G.711, G.722, G.729, iLBC
Dimensions	Varies by model
Weight	Varies by model
Wi-Fi	Yes (varies by model)