Cisco 8845 Administration Guide

DescriptionField
Defines the delay (in seconds) that the phone waits after a change is made, and then reports
the configuration.
This field is used only when Report to Server is set to On Local Change.
Default: 60
Minimum: 10
Maximum: 900
Example XML configuration:
<Upload_Delay_On_Local_Change ua="na">
60
</Upload_Delay_On_Local_Change>
Upload Delay
On Local
Change:
Firmware Upgrade
DescriptionParameter
Allows firmware update operations independent of
resync actions.
Default: Yes
Upgrade Enable
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
291
Cisco IP Phone Troubleshooting
Firmware Upgrade

Cisco 8845 Specifications

General

Camera	No
Audio	Wideband audio
Speakerphone	Yes
Wi-Fi	No
Display	5-inch color display
Resolution	480 x 272 pixels
Ethernet	10/100/1000 Mbps
PoE	IEEE 802.3af/at
Protocols	SIP
Codecs	G.711, G.722, G.729a, iLBC
USB Ports	2 x USB 2.0