Cisco 8845 Administration Guide

DescriptionParameter
If enabled, restricts to automatically pick up an
incoming call on a shared line when you take the
phone off-hook.
SCA Sticky Auto Line Seize
This parameter allows you to choose the number of
calls per line button. You can choose a value from 2
to 10.
Default: 2
Call Appearances Per Line
Supplementary Services
DescriptionParameter
Enable or disable three-way conference service.
Default: Yes
Conference Serv
Enable or disable attended-call-transfer service.
Default: Yes
Attn Transfer Serv
Enable or disable blind-call-transfer service.
Default: Yes
Blind Transfer Serv
Enable or disable do not disturb service.
Default: Yes
DND Serv
Enable or disable block-anonymous-call service.
Default: Yes
Block ANC Serv
Enable or disable blocking outbound Caller-ID
service.
Default: Yes
Block CID Serv
Enable or disable secured call services.
Default: Yes
Secure Call Serv
Enable or disable call-forward-all service.
Default: Yes
Cfwd All Serv
Enable or disable call-forward-on-busy service.
Default: Yes
Cfwd Busy Serv
Enable or disable call-forward-no-answer service.
Default: Yes
Cfwd No Ans Serv
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
309
Cisco IP Phone Troubleshooting
Supplementary Services

Cisco 8845 Specifications

General

Camera	No
Audio	Wideband audio
Speakerphone	Yes
Wi-Fi	No
Display	5-inch color display
Resolution	480 x 272 pixels
Ethernet	10/100/1000 Mbps
PoE	IEEE 802.3af/at
Protocols	SIP
Codecs	G.711, G.722, G.729a, iLBC
USB Ports	2 x USB 2.0