Hearing-Impaired Accessibility Features
Your phone comes with standard accessibility features that require little or no setup.
Figure 6: Hearing-Impaired Accessibility Features—Cisco IP Phone 8861 Shown
The following table describes the hearing-impaired accessibility features on the Cisco IP Phone 8800 Series.
Table 13: Hearing-Impaired Accessibility Features
DescriptionAccessibility FeatureItem
This lighted strip is visible from all angles. Your phone
also provides an audible message-waiting indicator.
To change the light or the audible voice-message
indicator, sign in to the Self Care portal and access the
message-indicator settings. You can change each setting
to on or off.
Your administrator can also change your settings.
Visual message-waiting indicator
(handset)
1
• Toggle the Mute and Speakerphone buttons on
and off to indicate the phone state.
• Use the Mute button to toggle the microphone on
or off. When the microphone is muted, the button
is lit.
• Use the Speakerphone button to toggle the
speakerphone on or off. When the speakerphone
is on, the button is lit.
Visual notification of phone state2
To Next Page
Loading...
