HeadlineIdentifier
9951 IP phone paired with BT hands free device crashes and rebootsCSCud12855
9971 Acoustic Fine-Tuning for certain customersCSCud13359
Barging Into Existing Conference Does Not WorkCSCud27156
802.1x EAP/TLS with 8961 Phone not workingCSCud33048
Onhook dialing does not work when speaker phone is disabled on 89XX/99XXCSCue04738
8961 - Corruption of EAP packets - Frame Size increases to 1514 bytesCSCue16891
Simplified Conference & Transfer feature to 9.3(2) ESCSCue29326
cannot do onhook dial after press call or speakerCSCue42261
9971 auto dials the Speed Dial and BLF SD as Phantom callsCSCuf13779
Barge is enabled when the call is not connectedCSCuf25139
Phone restart while conferencing an active callCSCuf41471
Stop CUCM-pub during active call, the call will be ended at caller sideCSCuf44663
89xx/99xx phone reboot upon ignoring actionable alert repeatedlyCSCuf93488
Documentation, service requests, and additional information
For information on obtaining documentation, submitting a service request, and gathering additional information,
see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco
technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed
and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free
service and Cisco currently supports RSS Version 2.0.
Cisco Unified IP Phone 8961, 9951, and 9971 Release Notes for Firmware Release 9.3(2)SR1
12
Cisco Unified IP Phone 8961, 9951, and 9971 Release Notes for Firmware Release 9.3(2)SR1
Documentation, service requests, and additional information
To Previous Page
Loading...
Need help?
General
