Figure 50: Removing a Bale Clasp SFP or SFP+ Module
5. Place the removed SFP module on an antistatic mat, or immediately place it in a static shielding bag if
you plan to return it to the factory.
6. Protect your line card by inserting clean SFP module cage covers into the optical module cage when there
is no SFP module installed.
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
99
Installing and Removing Line Cards and Transceiver Modules
Removing a Bale Clasp SFP or SFP+ Module