24-Port 10-Gigabit Ethernet Line Card with SFP+
The 24-Port 10-Gigabit Ethernet (GE) line card provides two stacked 2x6 cage assemblies for SFP+ Ethernet
optical interface modules.
• With two RSP cards installed in the router, the 24-Port 10GE line card runs at line rate.
• With a single RSP card installed in the router, the 24-Port 10GE line card is a 220 Gbps line rate card.
The 24-Port 10GE line card is available in either an -SE (Service Edge Optimized) or -TR (Packet Transport
Optimized) version.
Each SFP+ cage on the 24-Port 10GE line card has an adjacent Link LED visible on the front panel. The Link
LED indicates the status of the associated SFP+ port, as described in Line Card LEDs, on page 138.
The following figure shows the 24-Port 10GE line card front panel and connectors.
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
27
Overview
24-Port 10-Gigabit Ethernet Line Card with SFP+
To Next Page
Loading...
