Modular port adapter power is on and good, and modular port adapter is being configured.OnAmber
2-Port 10-Gigabit Ethernet Modular Port Adapter with XFP
The 2-Port 10-Gigabit Ethernet (GE) modular port adapter (MPA) provides two cages for XFP Ethernet optical
interface modules that operate at a rate of 10 Gbps. The two XFP modules can be 10GE multimode or single
mode connections.
Each XFP cage on the 4-Port 10GE MPA has an adjacent A/L (Active/Link) LED visible on the front panel.
The A/L (Active/link) LED indicates the status of the associated XFP port, as described in the below table
2-Port 10-Gigabit Ethernet MPA LEDs, and a Status LED for the MPA as shown in the following figure.
Figure 26: 2-Port 10-Gigabit Ethernet Modular Port Adapter
Status
LED
2A/L (Active/Link) LED1
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
55
Overview
2-Port 10-Gigabit Ethernet Modular Port Adapter with XFP
To Next Page
Loading...
