Cisco A9K-MOD400-TR - Page 80

Bay 1Bay 0
1x100G-MPA
8x10G-MPA
4x10G-MPA
2x10G-MPA
2x40G-MPA
1x40G-MPA
20x1G-MPA
A9K-MPA-32X1GE
1x100G-MPA
8x10G-MPA
4x10G-MPA
2x10G-MPA
2x40G-MPA
1x40G-MPA
20x1G-MPA
A9K-MPA-32X1GE
Table 24: MPAs Supported on A9K-MOD400-SE and A9K-MOD400-TR
Bay 1Bay 0
20x10G-MPA
2x100G-MPA
1x100G-MPA
8x10G-MPA
4x10G-MPA
2x10G-MPA
2x40G-MPA
1x40G-MPA
20x1G-MPA
A9K-MPA-32X1GE
20x10G-MPA
2x100G-MPA
1x100G-MPA
8x10G-MPA
4x10G-MPA
2x10G-MPA
2x40G-MPA
1x40G-MPA
20x1G-MPA
A9K-MPA-32X1GE
100G CPAK modules, CPAK-100G-ER4L and CPAK-100G-CWDM4, are supported on 100G line cards
from Release 6.3.2 onwards. Refer to CPAK module support table for more information.
Note
The following table lists the MPAs supported with consumption-model MOD400 (A9K-MOD400-CM) line
card.
The consumption-model MPAs can only be used only with consumption-model line cards.
Note
Table 25: MPAs Supported on A9K-MOD400-CM
Bay 1Bay 0
A9K-MPA20X10GE-CMA9K-MPA20X10GE-CM
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
66
Overview
Compatibility Matrix for MOD 200 and MOD 400 Line Cards