Chapter 7 Scenario: IPsec Remote-Access VPN Configuration
Implementing the IPsec Remote-Access VPN Scenario
7-18
ASA 5505 Getting Started Guide
78-18003-02
Note Enable split tunneling by checking the Enable Split Tunneling... check
box at the bottom of the screen. Split tunneling allows traffic outside the
configured networks to be sent out directly to the Internet instead of over
the encrypted VPN tunnel.
Step 2 Click Next to continue.
Verifying the Remote-Access VPN Configuration
In Step 11 of the VPN Wizard, review the configuration attributes for the new
VPN tunnel. The displayed configuration should be similar to the following:
To Next Page
Loading...
