Cisco ASA 5505

6-21
ASA 5505 Getting Started Guide
78-18003-02
Chapter 6 Scenario: DMZ Configuration
Configuring the Security Appliance for a DMZ Deployment
Step 4 Click OK to return to the Configuration > NAT pane. The configuration should
look similar to the following:
Step 5 Click Apply to complete the adaptive security appliance configuration changes.
Configuring Static PAT for Public Access to the DMZ Web Server
(Port Forwarding)
The DMZ web server needs to be accessible by all hosts on the Internet. This
configuration requires translating the private IP address of the DMZ web server
to a public IP address, which allows outside HTTP clients to access the web server
without being aware of the adaptive security appliance. In this scenario the DMZ
web server shares a public IP address with the outside interface of the adaptive
security appliance (209.165.200.225).