8-5
ASA 5505 Getting Started Guide
78-18003-02
Chapter 8 Scenario: Configuring Connections for a Cisco AnyConnect VPN Client
Implementing the Cisco SSL VPN Scenario
Starting ASDM
This section describes how to start ASDM using the ASDM Launcher software.
If you have not installed the ASDM Launcher software, see Installing the ASDM
Launcher, page 5-5.
If you prefer to access ASDM directly with a web browser or using Java, see
Starting ASDM with a Web Browser, page 5-8.
To start ASDM using the ASDM Launcher software, perform the following steps:
Step 1 From your desktop, start the Cisco ASDM Launcher software.
A dialog box appears.
Step 2 Enter the IP address or the host name of your adaptive security appliance.
Step 3 Leave the Username and Password fields blank.
Note By default, there is no Username and Password set for the Cisco ASDM
Launcher.
Step 4 Click OK.
Step 5 If you receive a security warning containing a request to accept a certificate, click
Ye s .
To Next Page
Loading...
